Build-to-NAVSEA-specifications DDG trunk safety nets

DESCRIPTION OF REQUIREMENTS

Requirement to Procure 16 Trunk Safety Nets for

USS LASSEN (DDG-82)

UNIT 100190 Box 1

FPO, AA 34091

1. ABBREVIATIONS

NAVSEA                   Naval Sea Systems Command                                   

DWG                          Drawing

2.0 INTRODUCTION

Requirement to procure and replace 16 trunk safety nets that meet the specifications in the included NAVSEA (DWG 5184163) technical drawing. A direct replacement is needed to comply with form, fit, and function. 

3.0 REQUIREMENTS

Each of the 16 nets will vary slightly and based on trunk measurements provided by Ships Force.  All required specifications and requirements are laid out on the attached NAVSEA (DWG 5184163) and completed nets must be weight tested to 1,750lbs in accordance with this drawing.  Each net will need a certificate of weight test with it, but manufacturer is not required to provide metal tag.  Ships force will procure and have necessary metal tags engraved.   

QTY: 16 nets.

4.0 DELIVERABLES

The objective of this action is to procure the items prescribed herein.

The expected delivery date for completion is 30 July 2023.

 

5.0 DELIVERY LOCATION

            5.1 Delivery Address:

            ATTN: Electronics Materials Officer

USS LASSEN (DDG-82) 21956

BLDG 191 Supply Street

Naval Station Mayport, FL 32228

            Points of Contact:

            Requestor:

            Jason Gaitor, jason.gaitor@ddg82.navy.mil

            Technical:     

            LT Jesse Routsong, jesse.routsong@ddg82.navy.mil

            CWO2 Daniel R. Mitchell, Daniel.Mitchell@DDG82.navy.mil

            GPC:

            LSSN Hope Rodriguez, hope.rodriguez@ddg82.navy.mil

           

            5.2 SPECIAL DELIVERY INSTRUCTIONS:

            Delivery must take place between the core business hours of 0800AM – 1530PM EDT,    Monday through Friday and shall not include after-hours, weekends, and holidays. The       most expeditious delivery means requested.

            5.3 INSPECTION REQUIREMENTS:

            Inspection and acceptance will be conducted at Destination/Government facility. The       items will be inspected by using visual inspection for quality and defect and testing        inspection for functionality and performance. Weight test documents will also be      verified.  Any defects or issues detected will be communicated back to the supplier    for replacement and/or repair IAW the company’s and FAR warranty clause.

            5.4 QUALITY:

            The contractor shall provide the timely delivery of goods and services.  Quality of all        services or supplies provided shall conform at least to commercial standards in the      relevant profession, trade, or field of endeavor.  All services shall be performed by       individuals fully qualified and licensed in their relevant area.

6.0 DEFENSE BIOMETRIC IDENTIFICATION SYSTEM (DBIDS)

Defense Biometric Identification System (DBIDS).  The Defense Biometric Identification System (DBIDS) is a DoD-owned and operated system developed by Defense Manpower Data Center as a force protection program to manage personnel identity and access at DoD installations.  DBIDS is a network database system designed to easily verify access authorization of personnel entering military installations by using barcodes and fingerprint biometric identifications.

To improve management and force protection at Navy installations, the Navy is transitioning from using the Navy Commercial Access Control System (NCACS) to the Defense Biometric Identification System (DBIDS) for Contractors and vendors requiring access to an installation at no cost to them.  The transition will begin 17 April 2017 and individuals will have up to 180 days to obtain the permanent card.  After August 14, 2017, NCACs cards will no longer be accepted.

In order to obtain base access, an individual needs to acquire DoD sponsorship, have a thorough identity check, be properly vetted, and have a legitimate reason for base access.  Identity checks require a passport or a Real ID Act-compliant state driver's license.  Vetting occurs when the individual's background and ID are compared against authoritative criminal justice data bases, and the individual has a letter or official document from the sponsoring organization which articulates the reason for access.  When the above criteria are satisfactorily met, DBIDs credentials are issued.

NCACS cardholders will have 120 days from April 17, 2017 to obtain a temporary DBIDS paper pass.  After the applicant obtains their DBIDS paper pass, they will have an additional 180 days to obtain an actual DBIDS card at no cost.  Those requesting new access onto installations will receive the DBIDS card at the same time they are initially approved for access.  After August 14, 2017, NCACS cards will no longer be accepted for installation access.

Additional information is available at https://www.cnic.navy.mil/om/dbids.html.