USCG SNOW BLOWER RQMT
Looking for contract opportunity help?
APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.
APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.
The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).
General Information
- Contract Opportunity Type: Combined Synopsis/Solicitation (Updated)
- Updated Published Date: Aug 27, 2024 06:39 pm EDT
- Original Published Date:
- Requirements Strategy:
- Inactive Policy: 15 days after date offers due
- Updated Inactive Date: Sep 11, 2024
- Original Inactive Date:
- Initiative:
- None
Classification
- Original Set Aside:
- Product Service Code:
- NAICS Code:
- Place of Performance: AK 99574USA
Description
THIS SOLICITATION HAS BEEN CANCELLED. THIS OPPORTUNITY WILL BE READVERTISED UNDER SAM SOLICTATION NUMBER 20270PR240000192Q. IF YOU SUBMITTED A QUOTE UNDER THIS SOLICITATION, IT WILL NEED TO BE RESUBMITTED UNDER THE NEW SOLICITATION TO BE ELIGIBLE FOR AWARD.
Scope of Work and Specifications
for
Cordova Snow Blower
USCG Station Cordova
Located at
USCG Station Cordova
Mile 13 Copper River Hwy
Cordova, AK 99574
July 2024
Commanding Officer
United States Coast Guard
Sector Southeast Alaska
Sector Engineering
Juneau, AK 99801
- SCOPE:
Specification Requirements for AVSUPFAC Cordova Snow Blower
1. 28” Ribbon type auger
2. Rated for 1400 tons/hour
3. Under 100” Width
4. Under 45” Height
5. Under 95” Length
6. Under 7500 pounds total weight
7. Heated LED lighting on frame, chute, engine, and safety bolts
8. Two section chute deflector
9. Shotgun style drum outlet extension
10. ACS style quick coupler.
- Delivery Schedule The contractor shall deliver to location / FOB DESTINATION within 60 calendar days from the date of contract award.
NOTE: This requirement is lowest priced, Technically Acceptable (LPTA) in accordance with FAR 13 simplified Acquisition Procedures.
ANY SHIPPING COSTS TO REQUIRED DELIVERY ADDRESS SHALL BE INCLUDED IN FINAL CONTRACTORS PRICED QUOTE.
LIABILITY OF DAMAGES: The contractor shall be liable for all damages to Government equipment and property when such damage is due to fault or negligence of the contractor. The contractor shall be responsible for all damages or injury to persons that occur because of the contractor’s fault or negligence. The contractor shall take proper safety and health precautions to protect the work the workers the public, and the property of others.
Payment terms will be as specified in subsequent purchase order/ contract award documentation, which is NET 30 DAYS from RECEIPT/ACCEPTANCE OF PRODUCT/S.
Point of Contact:
For any questions or clarifications regarding this requirement, please contact the contracting officer(KO) via email at least 10 business days before closing date/time of this REQUEST FOR PROPSAL (RFP).
NOTE: ALL PROPOSALS/ QUOTES SHALL BE SUBMITTED ONLY VIA THE FED BIZZ MARKETPLACE APPLICATION.
Closing date & time: proposals/quotes and any supporting documentation SHALL BE RECEIVED NO LATER THAN: 3:00 PM ALASKA TIME ZONE ON Monday, 09 SEPTEMBER 2024.
Deno Stamos
Senior Field Contracting officer (SFCO)
USCG KETCHIKAN
Deno.a.stamos@uscg.mil
907-228-0270
Scope of Work and Specifications
for
Cordova Snow Blower
USCG Station Cordova
Located at
USCG Station Cordova
Mile 13 Copper River Hwy
Cordova, AK 99574
July 2024
Commanding Officer
United States Coast Guard
Sector Southeast Alaska
Sector Engineering
Juneau, AK 99801
- SCOPE:
Specification Requirements for AVSUPFAC Cordova Snow Blower
1. 28” Ribbon type auger
2. Rated for 1400 tons/hour
3. Under 100” Width
4. Under 45” Height
5. Under 95” Length
6. Under 7500 pounds total weight
7. Heated LED lighting on frame, chute, engine, and safety bolts
8. Two section chute deflector
9. Shotgun style drum outlet extension
10. ACS style quick coupler.
- Delivery Schedule The contractor shall deliver to location / FOB DESTINATION within 60 calendar days from the date of contract award.
NOTE: This requirement is lowest priced, Technically Acceptable (LPTA) in accordance with FAR 13 simplified Acquisition Procedures.
ANY SHIPPING COSTS TO REQUIRED DELIVERY ADDRESS SHALL BE INCLUDED IN FINAL CONTRACTORS PRICED QUOTE.
LIABILITY OF DAMAGES: The contractor shall be liable for all damages to Government equipment and property when such damage is due to fault or negligence of the contractor. The contractor shall be responsible for all damages or injury to persons that occur because of the contractor’s fault or negligence. The contractor shall take proper safety and health precautions to protect the work the workers the public, and the property of others.
Payment terms will be as specified in subsequent purchase order/ contract award documentation, which is NET 30 DAYS from RECEIPT/ACCEPTANCE OF PRODUCT/S.
Point of Contact:
For any questions or clarifications regarding this requirement, please contact the contracting officer(KO) via email at least 10 business days before closing date/time of this REQUEST FOR PROPSAL (RFP).
NOTE: ALL PROPOSALS/ QUOTES SHALL BE SUBMITTED ONLY VIA THE FED BIZZ MARKETPLACE APPLICATION.
Closing date & time: proposals/quotes and any supporting documentation SHALL BE RECEIVED NO LATER THAN: 3:00 PM ALASKA TIME ZONE ON Monday, 09 SEPTEMBER 2024.
Deno Stamos
Senior Field Contracting officer (SFCO)
USCG KETCHIKAN
Deno.a.stamos@uscg.mil
907-228-0270
Scope of Work and Specifications
for
Cordova Snow Blower
USCG Station Cordova
Located at
USCG Station Cordova
Mile 13 Copper River Hwy
Cordova, AK 99574
July 2024
Commanding Officer
United States Coast Guard
Sector Southeast Alaska
Sector Engineering
Juneau, AK 99801
- SCOPE:
Specification Requirements for AVSUPFAC Cordova Snow Blower
1. 28” Ribbon type auger
2. Rated for 1400 tons/hour
3. Under 100” Width
4. Under 45” Height
5. Under 95” Length
6. Under 7500 pounds total weight
7. Heated LED lighting on frame, chute, engine, and safety bolts
8. Two section chute deflector
9. Shotgun style drum outlet extension
10. ACS style quick coupler.
- Delivery Schedule The contractor shall deliver to location / FOB DESTINATION within 60 calendar days from the date of contract award.
NOTE: This requirement is lowest priced, Technically Acceptable (LPTA) in accordance with FAR 13 simplified Acquisition Procedures.
ANY SHIPPING COSTS TO REQUIRED DELIVERY ADDRESS SHALL BE INCLUDED IN FINAL CONTRACTORS PRICED QUOTE.
LIABILITY OF DAMAGES: The contractor shall be liable for all damages to Government equipment and property when such damage is due to fault or negligence of the contractor. The contractor shall be responsible for all damages or injury to persons that occur because of the contractor’s fault or negligence. The contractor shall take proper safety and health precautions to protect the work the workers the public, and the property of others.
Payment terms will be as specified in subsequent purchase order/ contract award documentation, which is NET 30 DAYS from RECEIPT/ACCEPTANCE OF PRODUCT/S.
Point of Contact:
For any questions or clarifications regarding this requirement, please contact the contracting officer(KO) via email at least 10 business days before closing date/time of this REQUEST FOR PROPSAL (RFP).
NOTE: ALL PROPOSALS/ QUOTES SHALL BE SUBMITTED ONLY VIA THE FED BIZZ MARKETPLACE APPLICATION.
Closing date & time: proposals/quotes and any supporting documentation SHALL BE RECEIVED NO LATER THAN: 3:00 PM ALASKA TIME ZONE ON Monday, 09 SEPTEMBER 2024.
Deno Stamos
Senior Field Contracting officer (SFCO)
USCG KETCHIKAN
Deno.a.stamos@uscg.mil
907-228-0270
Scope of Work and Specifications
for
Cordova Snow Blower
USCG Station Cordova
Located at
USCG Station Cordova
Mile 13 Copper River Hwy
Cordova, AK 99574
July 2024
Commanding Officer
United States Coast Guard
Sector Southeast Alaska
Sector Engineering
Juneau, AK 99801
- SCOPE:
Specification Requirements for AVSUPFAC Cordova Snow Blower
1. 28” Ribbon type auger
2. Rated for 1400 tons/hour
3. Under 100” Width
4. Under 45” Height
5. Under 95” Length
6. Under 7500 pounds total weight
7. Heated LED lighting on frame, chute, engine, and safety bolts
8. Two section chute deflector
9. Shotgun style drum outlet extension
10. ACS style quick coupler.
- Delivery Schedule The contractor shall deliver to location / FOB DESTINATION within 60 calendar days from the date of contract award.
NOTE: This requirement is lowest priced, Technically Acceptable (LPTA) in accordance with FAR 13 simplified Acquisition Procedures.
ANY SHIPPING COSTS TO REQUIRED DELIVERY ADDRESS SHALL BE INCLUDED IN FINAL CONTRACTORS PRICED QUOTE.
LIABILITY OF DAMAGES: The contractor shall be liable for all damages to Government equipment and property when such damage is due to fault or negligence of the contractor. The contractor shall be responsible for all damages or injury to persons that occur because of the contractor’s fault or negligence. The contractor shall take proper safety and health precautions to protect the work the workers the public, and the property of others.
Payment terms will be as specified in subsequent purchase order/ contract award documentation, which is NET 30 DAYS from RECEIPT/ACCEPTANCE OF PRODUCT/S.
Point of Contact:
For any questions or clarifications regarding this requirement, please contact the contracting officer(KO) via email at least 10 business days before closing date/time of this REQUEST FOR PROPSAL (RFP).
NOTE: ALL PROPOSALS/ QUOTES SHALL BE SUBMITTED ONLY VIA THE FED BIZZ MARKETPLACE APPLICATION.
Closing date & time: proposals/quotes and any supporting documentation SHALL BE RECEIVED NO LATER THAN: 3:00 PM ALASKA TIME ZONE ON Monday, 09 SEPTEMBER 2024.
Deno Stamos
Senior Field Contracting officer (SFCO)
USCG KETCHIKAN
Deno.a.stamos@uscg.mil
907-228-0270
Contact Information
Primary Point of Contact
- DENO STAMOS
- deno.a.stamos@uscg.mil