Skip to main content

An official website of the United States government

You have 2 new alerts

Aluminum hull workboat, outboard motor

Looking for contract opportunity help?

APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.

APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.

The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).

General Information

  • Contract Opportunity Type: Solicitation (Updated)
  • Updated Published Date: Sep 21, 2022 12:05 pm CDT
  • Original Published Date: Sep 02, 2022 09:06 am CDT
  • Updated Date Offers Due: Sep 22, 2022 02:00 pm CDT
  • Original Date Offers Due: Sep 16, 2022 11:00 am CDT
  • Inactive Policy: 15 days after date offers due
  • Updated Inactive Date: Oct 07, 2022
  • Original Inactive Date: Oct 01, 2022
  • Initiative:
    • None

Classification

  • Original Set Aside:
  • Product Service Code: 1990 - MISCELLANEOUS VESSELS
  • NAICS Code:
    • 336612 - Boat Building
  • Place of Performance:

Description

Specifications for Aluminum hull boat:

- Length shall be 18 ft (maximum), 96-inch beam, 72-inch bottom width, 30-inch sidewalls, 25-inch transom, all made with 3/16 inch marine grade aluminum.

- Aluminum workboat shall have smooth side walls (no ribs), rectangular gunwale, double hole bow eye (trailer winch), and hull design shall have a Semi-V shape, 4-inch false floor – foam filled covered with tread-plate and box rear sump.

- Bow shall have a 4-foot bow deck, finished with tread-plate, foam filled and have a lip and scupper on the end of the deck. Two (2) 6-inch X 24-inch X 36-inch push knees installed on bow with rubber facing

- A poly bumper board shall be installed on both sides for the entire length of the boat.

- Four (4) 8-inch mooring cleats shall be installed on the gunwales and four (4) lifting eyes shall be installed on gunwales for lifting boat. 

- Side mounted LED running lights shall be installed, socket for stern light installed on gunwale.

- Bottom of hull shall be equipped with 2-inch angle aluminum to serve as bottom rails aiding in boat operation.

- Steering console shall be center mounted, out-fitted with windshield and a grab rail frame. Center console shall be equipped with steering wheel, battery selector switch, bilge pump switch, running lights switch.

- Two (2) 24-inch aluminum seat storage boxes with lockable lid. One seat shall be located at the center console for the boat operator and the second seat shall be located in front of console to hold batteries.

- Two (2) 60-inch aluminum side seat storage boxes with lockable lid, located on port and starboard side of boat

- Two (2) marine batteries

- One (1) Auto bilge pump, minimum size of 500 gph installed in boxed rear sump

- Transom shall be equipped with stern splashguard

- Shall be NEW either 2023 or 2022 Model Year

Specifications for Outboard Motor Package:

- One (1) 115 HP 4 stroke outboard motor, equipped with outboard manufacturer engine side mount control, control cables, instrument harness, tachometer, hour meter, temperature gauge. Outboard motor shall be equipped with stainless steel propeller.

-Outboard motor gauges shall be installed on the center console.

- Shall be NEW either 2023 or 2022 Model Year

Contact Information

Contracting Office Address

  • KO CONTRACTING DIVISION 332 MINNESOTA STREET SUITE 1500
  • SAINT PAUL , MN 55101-1323
  • USA

Primary Point of Contact

Secondary Point of Contact

History