Skip to main content

An official website of the United States government

You have 2 new alerts

Remove and Replace Low Pressure Hoses

info alert

Note: There have been new actions to this contract opportunity. To view the most recent action, please click here.

Looking for contract opportunity help?

APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.

APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.

The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).

General Information

  • Contract Opportunity Type: Solicitation (Original)
  • Original Published Date: Apr 04, 2023 11:45 am EDT
  • Original Date Offers Due: Apr 12, 2023 03:00 pm EDT
  • Inactive Policy: 15 days after date offers due
  • Original Inactive Date: Apr 27, 2023
  • Initiative:
    • None

Classification

  • Original Set Aside:
  • Product Service Code: 4720 - HOSE AND FLEXIBLE TUBING
  • NAICS Code:
    • 326220 - Rubber and Plastics Hoses and Belting Manufacturing
  • Place of Performance:
    Harrison Township , MI 48045
    USA

Description

Remove and Replace Low Pressure Hoses

Statement of Work

 March 8th, 2023

C.1. General

C.1.1 The overall objective of this effort is to remove the existing five (5) low pressure (return) hoses and install new high pressure R2AT-32 2” hoses with all necessary hardware to connect to existing hydraulic system. This project is located at GVSC’s Bridge Technology Laboratory, B1424 Selfridge ANGB, MI.  The Bridge Technology Laboratory performs structural strength testing on military bridges as well as provides their corresponding military load classification. 

C.2 Requirements

C.2.1 The Contractor’s Work includes all labor; supervision; materials; equipment; services; supplies; tools; transportation; or other items required or reasonably inferable to remove (5) low pressure hoses and replace with new high-pressure hoses.  Contractor’s Work shall be performed in accordance with the following minimum requirements and specifications:

C.2.1.1  Disconnect, remove and dispose of (5) low pressure (return) hydraulic hoses located near the catwalk on the load test gantry. Contractor shall prevent oil spills and collect and properly dispose of oil leaking from system/low pressure hoses during this project.

C.2.1.2. Install (5) new high pressure R2AT 2” hoses with all necessary fittings and hardware. Length of new high-pressure hoses shall match existing low pressure hoses to be replaced.

C.2.1.3  New high-pressure hoses shall have a disconnect fitting allowing for quick removal and re connecting at the valves along the catwalk. Contractor may re use existing disconnect fitting.

C.2.1.5 Re-install hoses to cylinders and refill oil as needed.

C.2.1.8 Contractor shall provide new oil as needed.

           

C.2.1.10 Period of Performance: 45 days from notice to proceed.   Cylinders shall be delivered to 44090 Schilling St, Harrison Township, MI 48045.  

Contact Information

Contracting Office Address

  • KO DIRECTORATE OF CONTRACTING 6501 EAST 11 MILE ROAD
  • WARREN , MI 48397-5000
  • USA

Primary Point of Contact

Secondary Point of Contact





History