Skip to main content

An official website of the United States government

You have 2 new alerts

Skid Steer

info alert

Note: There have been new actions to this contract opportunity. To view the most recent action, please click here.

Looking for contract opportunity help?

APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.

APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.

The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).

General Information

  • Contract Opportunity Type: Combined Synopsis/Solicitation (Original)
  • Original Published Date: Jul 25, 2024 09:09 am CDT
  • Original Date Offers Due: Aug 16, 2024 11:00 am CDT
  • Inactive Policy: 15 days after date offers due
  • Original Inactive Date: Aug 31, 2024
  • Initiative:
    • None

Classification

  • Original Set Aside:
  • Product Service Code:
  • NAICS Code:
  • Place of Performance:
    Hastings , MN 55033
    USA

Description

1. SCOPE

The contractor shall supply and deliver one skid-steer loader, to Lock and Dam 2 in Hastings, MN.   

2.  NEEDS DESCRIPTION

The skid-steer will be used for a variety of tasks at the project site.  Skid-steer will provide:

  •  Transporting pallets loaded with heavy-loaded sand-bags.
  • Snow-plowing a large parking area and roadway.
  • Lifting large timbers/raw materials around the site.
  • Lifting and placing heavy objects out of delivery trucks.
  • The bucket, forks, and snow plow will be primary attachments, as well as a jib hoist and sweeper attachment. (Attachments are not needed in this RFQ)

3. SPECIFICATIONS

The skid-steer loader shall meet or exceed the following requirements:

       -New less then 10hours

  • Diesel Engine with at least 68 horsepower or more.
  • Liquid Cooled Engine
  • Minimum operating capacity:  2000 lbs
  • Minimum tipping load:  4000 lbs
  • Must have hydraulic flow of 17.1 gal/min
  • Must have hydraulic pressure of at least 3500 Psi
  • Maximum width over tires:  68 inches
  • Lift arm support for arms while in raised position
  • Horn
  • Backup alarm
  • Lights:  front, rear, and dome
  • Instrumentation: Hour meter, Engine Temperature and Fuel Gages, Warning Lights
  • Operator Cab shall include electrical power port, top and rear windows, rear view mirror, parking brake, seat bar, and belt
  • Joystick controls
  • Engine/Hydraulic systems shutdown
  • Hydraulic quick coupler
  • Enclosed Roll Over Protective Structure (ROPS) cab
  • Falling Object Protective Structure (FOPS)
  • Air Conditioning, Heater, and defroster
  • Debris barrier
  • Cab door with wiper/washer
  • Side windows
  • Suspension seat
  • High flow hydraulics
  • Power quick tach
  • Manufacturer’s standard industry warranty

4. TRADE-IN

The contractor will accept trade-in of one Bobcat 743B skid-steer loader with 2001.8 HRs, located at Lock and Dam 2 in Hasting, MN.  The skid-steer does not include a bucket or any attachments for the trade-in.  The Point of Contact for inspecting the Bobcat is Steve Heidbrider 651-235-1816.

The value of the trade-in will be entered separately in the quote, but the evaluation of quotes will be made using the total price.

5. DELIVERY DUE DATE

Delivery shall be made no later than 6-Sept-2024.

6. SHIPMENT

The bid price shall include the cost of transporting and unloading to the destination site.  Shipment shall be prepaid and made at the Contractor's expense. Please do not quote shipping or delivery charges separately.

Please see attached solicitation for additional information.

Contact Information

Primary Point of Contact

Secondary Point of Contact

History