Skip to main content

An official website of the United States government

You have 2 new alerts

Auger System Removal Cleanout

Looking for contract opportunity help?

APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.

APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.

The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).

General Information

  • Contract Opportunity Type: Presolicitation (Original)
  • Original Published Date: Sep 18, 2024 10:28 am CDT
  • Original Response Date: Sep 24, 2024 10:00 am CDT
  • Inactive Policy: 15 days after response date
  • Original Inactive Date: Oct 09, 2024
  • Initiative:
    • None

Classification

  • Original Set Aside:
  • Product Service Code: 1680 - MISCELLANEOUS AIRCRAFT ACCESSORIES AND COMPONENTS
  • NAICS Code:
  • Place of Performance:
    Tinker AFB , OK 73145
    USA

Description

The AMXG (569th Squadron) is requesting utilization of funds for the remanufacturing of our custom ABS Blast Abrasive Floor Auger System. The requested equipment item descriptions/specifications are outlined below:


• Remanufacture on Two (2) Abrasive Floor Auger System, Model Number: Custom / Serial # 804 OC #’s 20729/20730, to include the following:
o  Removal of Lids, Grating, Shed Plates, Augers, and Throughs
o Clean & Clear Water and Debris from under Media Reclaim Trough including pressure wash (x2) separate reclaims that are approximately 39’ in length.
o Clean & Clear Water and Debris from under Media Reclaim Trough including pressure wash (x2) separate reclaims that are approximately 39’ in length.
o Remanufacture of the following parts needing repair due to corrosion/damage:
 Four (4) each, ABS-BRG2000FB (BRG2000FB / 2" Flange Bearing, 4-bolt)
 Four (4) each, ABS-SRP-2 (Seal Retainer Plate for 2" Flange Bearing, apprx. 6" x 6")
 Sixteen (16) each, ABS-SPACER BAR-2FB (SPACER BAR-2FB / Spacer Bar for 2" Flange Bearing)
 Four (4) ABS-SEALFE2 (Felt Seal for 2" Flange Bearing - (apprx. 6" x 4"),)
 Two (2) each, ABS-BRG2000HB (2" Hanger Bearing)
 Two (2) each, ABS-SEALFEHB (Felt Seal for 2" Hanger Bearing, Large Hole)
 Two (2) each, ABS-SEALFEHBS (SEALFEHBS / Felt Seal for 2" Hanger Bearing, Small Hole)
 One (1) each, ABS-HGRBRGCVRS-LH (Hanger Bearing Cover, Standard Style, Left Hand)
 One (1) each, ABS- HGRBRGCVRS-RH (Hanger Bearing Cover, Standard Style, Right Hand)
 Two (2) each, ABS-SH2X2434D4 (2" Dia x 24-3/4" Long Drive Shaft with 4" Keyway (shaft closest to elev.))
 Two (2) each, ABS-SH2X2450QRC (2" Dia x 24-1/2" Long Coupling Shaft, Quick Release)
 Two (2) each,ABS-SH2X1534E (2" Dia x 15-3/4" Long Free End Shaft)
 Four (4) each, ABS-POLYBUSHING-0 (2" ID x 5" OD x 10" Long Polyurethane Bushing with 5/8" dia. Bolt Holes)
 Twenty (20) each,ABS-BOLT-AUGER-7G8 ((1) 5/8-11 x 7" Grade 8 Hardened Bolt & (1) Nylock Nut for auger)


o Correct any concrete areas that are damaged, to include applying concrete sealant to exposed dry pits, and any damage that occurs during removal of troughs.
o Reinstallation of Troughs, Augers, Shed Plates, Grating, and Lids

Contact Information

Contracting Office Address

  • CP 405 734 9107 3001 STAFF DR STE 2S76
  • TINKER AFB , OK 73145-3303
  • USA

Primary Point of Contact

Secondary Point of Contact

History