Repair Kit, Rod and Seal

Line No 1.

NSN: 2040-01-496-9422

Part No: FL-2605-29 PC37

DESC: REPAIR KIT, ROD AND SEAL

QTY 18 EA

Line No. 2

NSN: 3040-01-496-9424

Part No: 4.00CC-2HLTS24AC16.00

Desc: CYLINDER ASSY, ACTUATING, LINEAR

QTY 10 EA

Line No. 3

NSN: 5315-01-515-9868

Part No: FL-2605-13 SHT 5

Desc: PIN,STRAIGHT, HEADLESS

QTY: 04 EA

Line 1:

REPAIR KIT, ROD AND SEAL, MANUFACTURED IN ACCORDANCE WITH SFLC SPECIFICATION P-573-0502 WITH THE FOLLOWING MODIFICATION:

THE CONTRACTOR SHALL NOT DRILL THE 3/4 INCH HOLE THROUGH THE EXTENSION ROD AS INDICATED ON DETAIL 51-C OF USCG DRAWING FL-2605-29 REV. L SHEET 7 (ELEVATION ZONE 51D).

THIS HOLE WILL BE DRILLED IN THE FIELD AT TIME OF INSTALLATION.

SEE SFLC SPEC P-573-0502, CHANGE 3 FOR PACKAGING, MARKING AND BAR CODING REQUIREMENTS.

PRESERVATION, PACKING, & MARKING SHALL BE IN ACCORDANCE WITH SPECIFICATIONS:

SFLC SPECIFICATION P-573-0502 CHANGE 3 DATED: 10/30/17

EACH KIT PACKED IN ITS OWN BOX AND MARKED.

Line 2:

CYLINDER ASSY, ACTUATING, LINEAR BUILD TO SERIAL # FF346811 B PARKER SERIES 2H, HYDRAULICALLY OPERATED, SIDE LUG MOUNTING STYLE, 4 INCH BORE DIAMETER, 2.5 INCH ROD DIAMETER, 16 INCH STROKE LENGTH, SINGLE ROD END, SYSTEM OPERATING PRESSURE: MAX300 PSI, MIN 200 PSI.

END SUPPORT CASE IS FIXED AND RIGIDLY GUIDED, PISTON SEAL TYPE:

LIPSEAL CLASS1 NITRILE, POLYURETHANE (STANDARD).

INLET AND OUTLET PORTS#12 SEA STRAIGHT THREAD O-RING, PISTON ROD STUD TO HAVE 1 7/8-12 TYPE A UNF STANDARD THREADS, HEAD END AND CAP END TO HAVE PORT IN POSITION 1, CUSHION IN POSITION 2, AND AIR BLEEDS IN POSITION 4. ROD GLAND ASSEMBLY SEAL CONSISTING OF 1 EACH LIPSEAL AND

1 EACH WIPER SEAL. CYLINDER HOUSING-STEEL TUBING: PISTON ROD-CHROME PLATED CARBON STEEL.

INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1 E METHOD 10, CUSHIONED IN A DOUBLE LAYER OF 3/4 IN BUBBLE WRAP AND PACKED IN AN APPROPRIATELY SIZED ASTM-D6880 CLASS 2 HEAVY DUTY SCREWED WOODEN BOX.

MARKING IAW MIL-STD-129R.

PRESERVATION, PACKING, & MARKING SHALL BE IN ACCORDANCE WITH SPECIFICATIONS:

SEE DESCRIPTION SPEC DATA DATED: 11/08/22

SEE DESCRIPTION SPEC DATA

Line 3:

LEVEL WIND PIVOT PIN.

MANUFACTURE IAW DRAWING FL-2605-13 REVISION C, SHEETS 1, 5 AND 6.

RUNOUT TOLERANCE SHALL BE HELD TO +/-.001" ON THE 8", 8 1/4" DIAMETERS AND FLANGE FACE.

QA INSPECTION SHALL CONSIST OF: 100% DIMENSIONAL, SURFACE FINISH AND RUNOUT READINGS.

THERE WILL BE NO ACCEPTANCE OUTSIDE OF THE DIMENSIOANL CONFORMANCE AS WE HAVE TRIED THIS IN THE PAST AND HAS CREATED PROBLEMS.

END ITEM IDENTIFICATION : BUOY CHAIN WINCH ASSEMBLY, P/N CW1 ABOARD 225 FT WLB, 175 FT WLM, AND 240 FT WLBB GLIB PROJECT COAST GUARD VESSELS NO WAIVERS WILL BE GRANTED FOR THESE ITEMS!!!!

PRESERVATION, PACKING, & MARKING SHALL BE IN ACCORDANCE WITH SPECIFICATIONS:

SEE DESCRIPTION DATED: 11/08/22

PACKAGE AND MARK INDIVIDUALLY.

 - NO SUBSTITUTIONS.