Skip to main content

An official website of the United States government

You have 2 new alerts

Screw Type Air Compressor

Looking for contract opportunity help?

APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.

APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.

The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).

General Information

  • Contract Opportunity Type: Combined Synopsis/Solicitation (Updated)
  • Updated Published Date: Mar 27, 2025 12:17 pm CDT
  • Original Published Date: Mar 19, 2025 08:36 am CDT
  • Updated Date Offers Due: Apr 02, 2025 09:00 am CDT
  • Original Date Offers Due: Mar 28, 2025 05:00 pm CDT
  • Inactive Policy: 15 days after date offers due
  • Updated Inactive Date: Apr 17, 2025
  • Original Inactive Date: Apr 12, 2025
  • Initiative:
    • None

Classification

  • Original Set Aside:
  • Product Service Code: 4310 - COMPRESSORS AND VACUUM PUMPS
  • NAICS Code:
    • 333912 - Air and Gas Compressor Manufacturing
  • Place of Performance:
    Fountain City , WI 54629
    USA

Description

SUBJECT: Scope of Work/Technical Specifications

Goetz Air Compressor Replacement

1. General Information.

    

     b. The quote will cover the new compressor, air dryer, and shipping to the below address. Installation of the new compressor will be done by USACE. 

2. Specific Information.

Below are the requirements for the new screw type air compressor.

  1. The new air compressor will be of an oil injected rotary screw design with variable speed drive.

  1. Unit will run efficiently in an environment that typically is above 100 degrees Fahrenheit.

  1. Minimum Air Pressure of 150 PSI, Maximum Air Pressure of 175 PSI

  1. 460 volts, 3 Phase. 30-40 Horsepower.

  1. Belt driven screw drive.

  1. Integrated refrigerant dryer and filters.

  1. External secondary air dryer that will be connected on the tank outlet. Secondary air dryer can be shipped separately and will be installed by USACE. 

  1. The screw drive air compressor will be mounted to a horizontal air tank.  Air tank size shall be 120-130 gallons in size.

  1. The air tank will have a drain located towards the bottom of the tank to drain moisture when needed.

  1. Dimensions should fall in the following range. Maximum Length 80", Maximum Width 40", Maximum Height 75".

  1. Tank outlet, 1” NPT.

  1. Low oil shutoff to shut down the compressor when oil gets low.  Oil tank will also have an oil sight glass.

  1. Emergency shutdown button located on the control panel.

Must be delivered no later than April 18, 2025.

3. Shipping Address

 Plant and Facilities Manager

            431 North Shore Drive

            PO BOX 397

            Fountain City, WI 54629

Contact Information

Contracting Office Address

  • KO CONTRACTING DIVISION 332 MINNESOTA STREET SUITE 1500
  • SAINT PAUL , MN 55101-1323
  • USA

Primary Point of Contact

Secondary Point of Contact

History