CreaTec Fischer & Co. GmbH Effusion Cell with various components or its equivalent

Kindly provide a Quote in my name with the current date and lead time.  Please offer BSA any discounts available for your Best Price.

Items to be quoted: 

1 EA  CT/1032165 Low-Temperature Effusion Cell LTC-40-10-WK

For the evaporation of material with medium vapour pressure, Base flange: DN 40 CF (OD 2.75”), Maximum diameter in vacuum: 38 mm, Length in vacuum (from flange): minimum 180 mm (or longer according to customer requirement), Maximum temperature: 1000 °C, 1 heating element made from tantalum wire, with PBN insulators,1 thermocouple type C, Prepared for crucibles with 10 cc volume.  With integrated water cooling system, He leak checked, heated and tested in UHV, Provided by and shipped from CreaTec Fischer & Co. GmbH (Germany). 

1 EA  CT/1029543 Shutter SHM-Mo

Rotary shutter to shut the molecular beam on and off, Integrated into the base flange of an effusion cell
With 2 stacked Molybdenum shutter blades, Distance between blade and crucible orifice: 15 mm (others on request), With shutter rod, made from Molybdenum, Manually actuated (automated versions on request), Provided by and shipped from CreaTec Fischer & Co. GmbH (Germany)

1 EA  CT/1029644 Crucible Al2O3-10

For usage with CreaTec effusion cell, Crucible size: 10 cc, Crucible material: Aluminumoxide (Al2O3)
Note: maximum temperature 1700deg C, Cleaned for MBE use, Provided by and shipped from CreaTec Fischer & Co. GmbH (Germany)

1 EA  CT/1029667 DC- Power supply type PS-S800

Power supply for heating of effusion cells, manipulators, etc., Single loop, 19” rack mount case, 3U
800 W maximum output power, Wide range input 110 - 240 V AC, connector type: CEE 7/4 (others on request), PID temperature controller Invensys Eurotherm 3504, accuracy ±0.1°, Temperature input thermocouple either type K or type C, Interlock input with bridge plug, Digital display of output current, voltage and power, 1x TCP/IP interface for readout of voltage and current, 1x TCP/IP or RS232 interface for temperature control

Please provide the following on your quote:

1.  Origin of Manufacture

2.  Unique Employee Identifier (UEI)

Please also return the following along with your quote:

1.         Published Price list: showing the items on your quote for price justification or a web screenshot (or link) of same/similar items with pricing and part number shown.

2.         System For Award Management (SAM):

In order to support DOE reporting requirements, BSA requires all its vendors/contractors to be registered in the U. S. Government supplier database entitled System For Award Management (SAM). Registration can be performed on line at www.sam.gov. If not already registered, please register as soon as possible since failure to do so may preclude BSA from doing business with your organization.  Please note that there is no charge for SAM registration. When registering, you are strongly urged to copy and paste www.sam.gov onto your browser address rather than utilizing your search engine. Utilizing your search engine may redirect you to an erroneous site. You may obtain assistance in completing your registration by contacting the Federal Help Desk at 866-606-8220 or by contacting your local Procurement Technical Assistance Center (PTAC), which can be found at https://www.aptac-us.org. 

3.          Equivalent Guidelines:

The parts or model numbers are listed for reference purposes only. Any alternate products being offered shall have equivalent, or greater, performance parameters to those specified. Suppliers that are offering alternate products shall list the manufacturer, model, and part numbers for the product. When quoting an alternate product, please provide sufficient documentation to permit thorough evaluation of the equivalency of your offer to the product specified.  BSA reserves the right to determine equivalency.

Any resulting purchase order will be subject to the attached terms and conditions.