19--WY NP TUNNEL JET WATERCRAFT
Inactive
Contract Opportunity
Notice ID
140R6024Q0089
Department/Ind. Agency
Looking for contract opportunity help?
APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.
APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.
The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).
General Information
- Contract Opportunity Type: Presolicitation (Original)
- Original Published Date: Jul 10, 2024 07:22 am MDT
- Original Response Date: Jul 15, 2024 10:00 am MDT
- Inactive Policy: 15 days after response date
- Original Inactive Date: Jul 30, 2024
- Initiative:
- None
Classification
- Original Set Aside:
- Product Service Code:
- NAICS Code:
- Place of Performance:
Description
The Bureau of Reclamation, Missouri Basin Region, intends to issue a Commercial Request for Quote (RFQ) for the following supplies:
Objectives
1. Delivery upon manufacturing completion- three (3) complete and operational watercraft and trailers to the Wyoming Area Office (WYAO) that is constructed to manufacturers specifications listed.
Required Technical Specifications
Specifications
1. Watercraft
A. Boat
i. Design: Tunnel Hull
ii. Length: 18 ft minimum
iii. Weight Capacity: 1500 lbs. minimum
iv. Hull Material and Thickness: Aluminum, .100¿ Gauge minimum
v. Fuel Capacity: 18 gallon minimum
vi. Finish: Coated to prevent corrosion
B. Motor
i. Type: Outboard with Jet Foot
ii. Rating: 80 Horsepower minimum
iii. Electric Start
C. Deck Arrangement
i. Flooring surface: Coated Non-Skid
ii. Console: Center
a. Gauges; fuel, tach, speedo, trim
b. Throttle
c. Spray/Wind Screen
iii. Seating: Six (6) minimum
D. Accessories
i. 2-Bank Battery Charger
ii. Installed Lifting Eyelets - attached in a manner sufficient to lift watercraft, motor and accessories with four-leg bridle.
iii. Buoyancy Pods
iv. Bilge Pump
v. Forward and Aft Cleats
vi. Bow Electrical Power Source for trolling motor (motor not included)
vii. Cover; All Season/Weather Resistant
2. Trailer
A. Lights/Electrical
i. 7-pole Electrical Connector
ii. LED lights
iii. Brake System meeting DOT regulations
B. Finish: Galvanized or Coated to prevent corrosion
C. Single Axle
i. Tires: Radial
ii. Wheels: Aluminum or Steel 13¿ minimum
D. Spare Wheel and Tire
E. Ratchet Tie Downs
F. Fenders
G. Receiver Attachment: Standard 1-7/8¿, 2¿ or 2-5/16¿ Ball
Required Performance Specifications
1. Delivery upon manufacturing completion three complete and operational watercraft with trailers to the Wyoming Area Office (WYAO).
2. Deliver all certifications of acceptance that states Inspection Certifications and Testing are completed and passed per Manufacturer¿s specifications.
A. Manufacturer¿s boat specifications must meet all applicable DOT, WYDOT and Wyoming Game and Fish Department regulations.
B. Manufacturer¿s trailer specifications must meet all DOT and WYDOT regulations.
The delivery location is: Bureau of Reclamation, located at 205 Chamberlain Road, Mills WY, 82644. FOB Destination of all supplies with an anticipated delivery date of on or before September 30, 2024.
It is anticipated the simplified acquisition set aside will be a Total Small Business.
It is anticipated the Request for Quote (RFQ) will be posted on or about 15 July 2024 via the SAM.gov website.
It is incumbent upon contractors to monitor the SAM.gov web page for RFQ release and all subsequent amendments.
The product service code is 1990 and the NAICS code is 336612.
HARD COPIES OF THE SOLICITATION WILL NOT BE ISSUED. Quotations are not requested and will not be accepted from this Pre-Solicitation Notice.
It is required all companies are to be actively registered in SAM.gov prior to submitting a quotation for this solicitation.
For further information or questions regarding this solicitation, please contact Chris Zook by e-mail at czook@usbr.gov.
Objectives
1. Delivery upon manufacturing completion- three (3) complete and operational watercraft and trailers to the Wyoming Area Office (WYAO) that is constructed to manufacturers specifications listed.
Required Technical Specifications
Specifications
1. Watercraft
A. Boat
i. Design: Tunnel Hull
ii. Length: 18 ft minimum
iii. Weight Capacity: 1500 lbs. minimum
iv. Hull Material and Thickness: Aluminum, .100¿ Gauge minimum
v. Fuel Capacity: 18 gallon minimum
vi. Finish: Coated to prevent corrosion
B. Motor
i. Type: Outboard with Jet Foot
ii. Rating: 80 Horsepower minimum
iii. Electric Start
C. Deck Arrangement
i. Flooring surface: Coated Non-Skid
ii. Console: Center
a. Gauges; fuel, tach, speedo, trim
b. Throttle
c. Spray/Wind Screen
iii. Seating: Six (6) minimum
D. Accessories
i. 2-Bank Battery Charger
ii. Installed Lifting Eyelets - attached in a manner sufficient to lift watercraft, motor and accessories with four-leg bridle.
iii. Buoyancy Pods
iv. Bilge Pump
v. Forward and Aft Cleats
vi. Bow Electrical Power Source for trolling motor (motor not included)
vii. Cover; All Season/Weather Resistant
2. Trailer
A. Lights/Electrical
i. 7-pole Electrical Connector
ii. LED lights
iii. Brake System meeting DOT regulations
B. Finish: Galvanized or Coated to prevent corrosion
C. Single Axle
i. Tires: Radial
ii. Wheels: Aluminum or Steel 13¿ minimum
D. Spare Wheel and Tire
E. Ratchet Tie Downs
F. Fenders
G. Receiver Attachment: Standard 1-7/8¿, 2¿ or 2-5/16¿ Ball
Required Performance Specifications
1. Delivery upon manufacturing completion three complete and operational watercraft with trailers to the Wyoming Area Office (WYAO).
2. Deliver all certifications of acceptance that states Inspection Certifications and Testing are completed and passed per Manufacturer¿s specifications.
A. Manufacturer¿s boat specifications must meet all applicable DOT, WYDOT and Wyoming Game and Fish Department regulations.
B. Manufacturer¿s trailer specifications must meet all DOT and WYDOT regulations.
The delivery location is: Bureau of Reclamation, located at 205 Chamberlain Road, Mills WY, 82644. FOB Destination of all supplies with an anticipated delivery date of on or before September 30, 2024.
It is anticipated the simplified acquisition set aside will be a Total Small Business.
It is anticipated the Request for Quote (RFQ) will be posted on or about 15 July 2024 via the SAM.gov website.
It is incumbent upon contractors to monitor the SAM.gov web page for RFQ release and all subsequent amendments.
The product service code is 1990 and the NAICS code is 336612.
HARD COPIES OF THE SOLICITATION WILL NOT BE ISSUED. Quotations are not requested and will not be accepted from this Pre-Solicitation Notice.
It is required all companies are to be actively registered in SAM.gov prior to submitting a quotation for this solicitation.
For further information or questions regarding this solicitation, please contact Chris Zook by e-mail at czook@usbr.gov.
Attachments/Links
Contact Information
Primary Point of Contact
- Zook, Chris
- czook@usbr.gov
- Phone Number 7195891804