6640--STAT Centrifuges Purchase - KC VAMC

Intent: It is the intent of the Kansas City VA Medical Center to purchase three (3) STAT centrifuges needed to for the separation of whole blood components with short turnaround times. Specifications/Salient Characteristics: The desired centrifuge should include the following (minimum) features: Silent units to decrease noise contamination in our laboratory Simultaneous Digital RPM and RCF Display Brushless DC Motor Digital Timer Display Timer Range 1-999, plus hold Save and Recall up to 3 speed and time configurations Lockable Settings On Error Displays Error Number with Explanation Completely Enclosed Rotor Chamber See-Through High-Strength Lid Dual Safety Interlock System Audible End-of-Run Indicator Spill-Resistant Control Panel Lid-Release tool 2/3 H.P. Direct Drive motor Microprocessor Control Small footprint, no bigger than 13 W X 16.5 D X 11.5 H 115V 60hz, 5A Max Speed RPM of 6,000 and Max Speed RCF of 3847 Must include End of Light 3. Submittals: 3.1. The contractor shall, provide all information listed below: 3.1.1. Manufacturer s Literature and Data: 3.1.1.1. The contractor shall provide any brochure(s) or literature detailing the offerings and specifications for this solicitation. 4. Delivery/Shipping 4.1 Contractor shall deliver all equipment to the Kansas City VA Medical Center at 4801 Linwood Blvd. Kansas City, MO 64128. 4.2 Freight charges are to be prepaid and added to invoice if applicable. This solicitation uses a Brand Name or Equal Description of the product required. This permits prospective contractors to offer products other than those specifically referenced by brand name: STAT TT Centrifuge Catalog number MACH-PPP End of Run Light (2100-903)