6515--Depuy Synthes Surgical Tray Items (VA-23-00037632)
info alert
Note: There have been new actions to this contract opportunity. To view the most recent action, please click here.
Inactive
Contract Opportunity
Notice ID
36C25623Q0480
Department/Ind. Agency
VETERANS AFFAIRS, DEPARTMENT OF
Sub-tier
VETERANS AFFAIRS, DEPARTMENT OF
Office
256-NETWORK CONTRACT OFFICE 16 (36C256)
Looking for contract opportunity help?
APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.
APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.
The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).
General Information
- Contract Opportunity Type: Sources Sought (Original)
- Original Published Date: Feb 15, 2023 10:30 am CST
- Original Response Date: Feb 22, 2023 01:00 pm CST
- Inactive Policy: Manual
- Original Inactive Date: Feb 27, 2023
- Initiative:
- None
Classification
- Original Set Aside:
- Product Service Code: 6515 - MEDICAL AND SURGICAL INSTRUMENTS, EQUIPMENT, AND SUPPLIES
- NAICS Code:
- 339112 - Surgical and Medical Instrument Manufacturing
- Place of Performance: SLVHCS Louisiana ,
Description
Department of Veterans Affairs
Network Contracting Office (NCO) 16
Request For Information (RFI)
DISCLAIMER: THIS IS A SOURCES SOUGHT NOTICE ONLY. THIS SYNOPSIS IS NOT A REQUEST FOR QUOTE, PROPOSAL, OR BID. This notice is not a solicitation as defined by FAR 2.101, therefore it shall not be construed as a commitment by the Government to enter into a contract, nor does it restrict the Government to an acquisition approach. All information contained in this Request for Information (RFI) is preliminary as well as subject to amendment and is in no way binding on the Government. Information submitted in response to this notice is voluntary; the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government. The Government is requesting that restrictive or proprietary markings not be used in response to this notice. If a solicitation is released, it will be synopsized in the Federal Contract Opportunities website or GSA. It is the responsibility of the interested parties to monitor these sites for additional information pertaining to this RFI
1. Title: Depuy Surgical Instruments
2. Purpose: The purpose of this RFI is to identify potential sources which will aid in defining the procurement strategy (e.g., set-aside, sole source, unrestricted) for a solicitation the VA intends on issuing shortly for the following:
Line No
Quantity
Item Description Depuy Brand Items
1.000
12
2.7 LCKNG SCREW SLF-TPNG T8 SD RECESS 8
2.000
12
2.7 LCKNG SCREW SLF-TPNG T8 SD RECESS 8
3.000
12
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 10
4.000
12
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 12
5.000
12
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 14
6.000
12
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 16
7.000
12
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 18
8.000
12
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 20
9.000
12
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 22
10.000
12
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 24
11.000
12
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 26
12.000
12
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 28
13.000
12
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 30
14.000
4
2.7/3.5 LCP POSTLAT DSTL FIB PL 3H/LT/77
15.000
4
2.7/3.5 LCP POSTLAT DSTL FIB PL 4H/LT/90
16.000
4
2.7/3.5 LCP POSLAT DSTL FIB PL 5H/L/103
17.000
4
2.7/3.5 LCP POSLAT DSTL FIB PL 6H/L/116
18.000
4
2.7/3.5 LCP POSLAT DSTL FIB PL 7H/L/129
19.000
4
2.7/3.5 LCP POSLAT DSTL FIB PL 11H/L/181
20.000
4
2.7/3.5 LCP POSLAT DSTL FIB PL 9H/L/155
21.000
4
2.7/3.5 LCP POSTLAT DSTL FIB PL 3H/RT/77
22.000
4
2.7/3.5 LCP POSLAT DSTL FIB PL 5H/R/103
23.000
4
2.7/3.5 LCP POSLAT DSTL FIB PL 6H/R/116
24.000
4
2.7/3.5 LCP POSLAT DSTL FIB PL 7H/R/129
25.000
4
2.7/3.5 LCP POSLAT DSTL FIB PL 9H/R/155
26.000
4
2.7/3.5 LCP POSLAT DSTL FIB PL 11H/R/181
27.000
4
2.7/3.5 LCP POSLAT DSTL FIB PL 11H/R/181
28.000
4
2.7/3.5 LCP POSLAT DSTL FIB PL 13H/R/207
29.000
4
2.0 THREADED DRILL GUIDE DEPTH GAUGE
30.000
4
DEPTH GAUGE FOR 2.0MM AND 2.4MM SCREWS
31.000
5
2.0MM DRILL BIT WITH DEPTH MARK/QC/140MM
32.000
4
HANDLE WITH QUICK COUPLING, SMALL
33.000
4
SDDRIVE SCREWDRIVER SHAFT T8 105MM
34.000
4
TORQUE LMTG ATCH 0.8NM, QUICK COUPLING
35.000
4
2.0MM LCP SOLID THREADED DRILL GUIDE
36.000
4
2.7/3.5 LCP LAT DSTL FIB PL 3H/LFT/73
37.000
4
2.7/3.5 LCP LAT DSTL FIB PL 4H/LFT/86
38.000
4
2.7/3.5 LCP LAT DSTL FIB PL 5H/LFT/99
39.000
4
2.7/3.5 LCP LAT DSTL FIB PL 7H/LFT/125
40.000
4
2.7/3.5 LCP LAT DSTL FIB PL 9H/LFT/151
41.000
4
2.7/3.5 LCP LAT DSTL FIB PL 11H/LFT/177
42.000
4
2.7/3.5 LCP LATERAL DSTL FIB PL 3H/RT/73
43.000
4
2.7/3.5 LCP LATERAL DSTL FIB PL 4H/RT/86
44.000
4
2.7/3.5 LCP LATERAL DSTL FIB PL 5H/RT/99
45.000
5
2.7/3.5 LCP LAT DSTL FIB PL 6H/RT/112
46.000
4
2.7/3.5 LCP LAT DSTL FIB PL 6H/LFT/112
47.000
4
2.7/3.5 LCP LAT DSTL FIB PL 7H/LFT/125
48.000
4
2.7/3.5 LCP LAT DSTL FIB PL 9H/LFT/151
49.000
4
2.7/3.5 LCP LAT DSTL FIB PL 11H/LFT/177
50.000
4
DEPTH GAUGE FOR 2.7MM & SMALL SCREWS
51.000
4
THRD PL HOLDER-LONG FOR 3.5 LCKNG HOLE
52.000
4
THREADED PLATE HOLDER
53.000
4
2.0 PARALLEL DRILL GUIDE & DRILL SLEEVE
54.000
4
2.7MM UNIVERSAL DRILL GUIDE
55.000
4
2.8MM THREADED DRILL GUIDE
56.000
4
1.6MM WIRE SLEEVE
57.000
4
1.6MM WIRE SLEEVE
58.000
4
3.5MM/2.5MM INSERT DRILL SLEEVE
59.000
4
RED FORCEPS SERRATED JAW-RATCHET 144
60.000
4
REDUCTION FORCEPS POINTS BROAD-RATCHET
61.000
4
DIRECT MEASURING DEVICE
62.000
4
TORQUE LMTG ATCH 1.5NM, QUICK COUPLING
63.000
4
HANDLE WITH QUICK COUPLING, SMALL
64.000
4
SCREW FORCEPS
65.000
4
PUSH-PULL REDUCTION DEVICE
66.000
4
1.6MM WIRE SLEEVE
67.000
4
2.8MM DRILL SLEEVE
68.000
4
3.5MM LOCKING SCREW SLEEVE
69.000
4
INSERTION GUIDE
70.000
4
SDDRIVE(TM) SCREWDRIVER T15
71.000
4
HOLDING SLEEVE
72.000
4
SMALL HEXAGONAL SCRDRIVER HOLDING SLV
73.000
4
SMALL HEXAGONAL SCRDRIVER HOLDING SLV
74.000
4
PERIOSTEAL ELVTR 6 CRVD BLD-ROUND EDGE
75.000
4
SM HOHMANN RETRACT 8 SHT NARROW TIP 160
76.000
4
HOHMANN RETRACTOR 15MM 160MM
77.000
4
HOHMANN RETRACTOR 15MM 160MM
78.000
4
SHARP HOOK
79.000
4
2.0MM DRILL BIT/QC/125MM
80.000
4
2.5MM DRILL BIT/QC/GOLD/110MM
81.000
4
2.7MM THREE-FLUTED DRILL BIT QC/125MM
82.000
4
3.5MM DRILL BIT/QC/110MM
83.000
4
TAP FOR 3.5MM CORTEX SCREWS GOLD/110MM
84.000
4
TAP FOR 4.0 CANCELLOUS BONE SCREWS/110
85.000
4
SDDRIVE SCREWDRIVER SHAFT QC/T15
86.000
4
COUNTERSNK 3.5 CORTEX & 4.0 CANCELL SCRS
87.000
4
1.25 KIRSCHNER WIRE TRCR POINT 150-10PK
88.000
4
1.6 KIRSCHNER WIRE W/TRCR POINT 150-10PK
89.000
4
2.0 KIRSCHNER WIRE TROCAR POINT 150-10PK
90.000
8
2.7MM CORTEX SCREW SELF-TAPPING 10MM
91.000
8
2.7MM CORTEX SCREW SELF-TAPPING 10MM
92.000
8
2.7MM CORTEX SCREW SELF-TAPPING 12MM
93.000
8
2.7MM CORTEX SCREW SELF-TAPPING 14MM
94.000
8
2.7MM CORTEX SCREW SELF-TAPPING 16MM
95.000
8
2.7MM CORTEX SCREW SELF-TAPPING 18MM
96.000
8
2.7MM CORTEX SCREW SELF-TAPPING 20MM
97.000
8
2.7MM CORTEX SCREW SELF-TAPPING 22MM
98.000
8
2.7MM CORTEX SCREW SELF-TAPPING 24MM
99.000
4
2.7MM CORTEX SCREW SELF-TAPPING 26MM
100.000
8
2.7MM CORTEX SCREW SELF-TAPPING 28MM
101.000
8
2.7MM CORTEX SCREW SELF-TAPPING 30MM
102.000
8
2.7MM CORTEX SCREW SELF-TAPPING 32MM
103.000
8
2.7MM CORTEX SCREW SELF-TAPPING 34MM
104.000
8
2.7MM CORTEX SCREW SELF-TAPPING 36MM
105.000
8
2.7MM CORTEX SCREW SELF-TAPPING 38MM
106.000
8
2.7MM CORTEX SCREW SELF-TAPPING 40MM
107.000
8
2.7MM CORTEX SCREW SELF-TAPPING 45MM
108.000
8
2.7MM CORTEX SCREW SELF-TAPPING 50MM
109.000
8
2.7MM CORTEX SCREW SELF-TAPPING 55MM
110.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 10
111.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 14
112.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 16
113.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 18
114.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 20
115.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 22
116.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 24
117.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 26
118.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 28
119.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 30
120.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 32
121.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 34
122.000
12
3.5 LOCKING SCREW SLF-TPNG SD RECESS 35
123.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 36
124.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 38
125.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 40
126.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD RECESS 42
127.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 45
128.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD RECESS 48
129.000
12
3.5 LOCKING SCREW SLF-TPNG SD RECESS 46
130.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 50
131.000
12
3.5 LOCKING SCREW SLF-TPNG SD RECESS 52
132.000
12
3.5 LOCKING SCREW SLF-TPNG SD RECESS 54
133.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 55
134.000
12
3.5 LOCKING SCREW SLF-TPNG SD RECESS 56
135.000
12
3.5 LOCKING SCREW SLF-TPNG SD RECESS 58
136.000
12
3.5 LCKNG SCREW SLF-TPNG W/SD(TM) REC 60
137.000
12
3.5MM CORTEX SCREW SELF-TAPPING 10MM
138.000
12
3.5MM CORTEX SCREW SELF-TAPPING 12MM
139.000
12
3.5MM CORTEX SCREW SELF-TAPPING 14MM
140.000
12
3.5MM CORTEX SCREW SELF-TAPPING 16MM
141.000
12
3.5MM CORTEX SCREW SELF-TAPPING 18MM
142.000
12
3.5MM CORTEX SCREW SELF-TAPPING 20MM
143.000
12
3.5MM CORTEX SCREW SELF-TAPPING 22MM
144.000
12
3.5MM CORTEX SCREW SELF-TAPPING 24MM
145.000
12
3.5MM CORTEX SCREW SELF-TAPPING 26MM
146.000
12
3.5MM CORTEX SCREW SELF-TAPPING 28MM
147.000
12
3.5MM CORTEX SCREW SELF-TAPPING 30MM
148.000
12
3.5MM CORTEX SCREW SELF-TAPPING 32MM
149.000
12
3.5MM CORTEX SCREW SELF-TAPPING 34MM
150.000
12
3.5MM CORTEX SCREW SELF-TAPPING 36MM
151.000
12
3.5MM CORTEX SCREW SELF-TAPPING 38MM
152.000
12
3.5MM CORTEX SCREW SELF-TAPPING 40MM
153.000
12
3.5MM CORTEX SCREW SELF-TAPPING 45MM
154.000
12
3.5MM CORTEX SCREW SELF-TAPPING 46MM
155.000
12
3.5MM CORTEX SCREW SELF-TAPPING 48MM
156.000
12
3.5MM CORTEX SCREW SELF-TAPPING 50MM
157.000
12
3.5MM CORTEX SCREW SELF-TAPPING 55MM
158.000
12
3.5MM CORTEX SCREW SELF-TAPPING 60MM
159.000
8
4.0 CANCELLOUS BONE SCREW FULLY THRD/10
160.000
8
4.0 CANCELLOUS BONE SCREW FULLY THRD/12
161.000
8
4.0 CANCELLOUS BONE SCREW FULLY THRD/14
162.000
8
4.0 CANCELLOUS BONE SCREW FULLY THRD/16
163.000
8
4.0 CANCELLOUS BONE SCREW FULLY THRD/16
164.000
8
4.0 CANCELLOUS BONE SCREW FULLY THRD/18
165.000
8
4.0 CANCELLOUS BONE SCREW FULLY THRD/20
166.000
8
4.0 CANCELLOUS BONE SCREW FULLY THRD/22
167.000
8
4.0 CANCELLOUS BONE SCREW FULLY THRD/24
168.000
8
4.0 CANCELLOUS BONE SCREW FULLY THRD/26
169.000
8
4.0 CANCELLOUS BONE SCREW FULLY THRD/28
170.000
8
4.0 CANCELLOUS BONE SCREW FULLY THRD/30
171.000
8
4.0 CANCELLOUS BONE SCREW FULLY THRD/35
172.000
8
4.0 CANCELLOUS BONE SCREW FULLY THRD/40
173.000
8
4.0 CANCELLOUS BONE SCREW FULLY THRD/45
174.000
8
4.0 CANCELLOUS BONE SCREW FULLY THRD/50
175.000
8
4.0 CANCELLOUS BONE SCREW FULLY THRD/55
176.000
8
4.0 CANCELLOUS BONE SCREW FULLY THRD/60
177.000
8
4.0 CANCELLOUS SCREW PARTIALLY THRD/10
178.000
8
4.0 CANCELLOUS SCREW PARTIALLY THRD/12
179.000
8
4.0 CANCELLOUS SCREW PARTIALLY THRD/14
180.000
8
4.0 CANCELLOUS SCREW PARTIALLY THRD/16
181.000
8
4.0 CANCELLOUS SCREW PARTIALLY THRD/18
182.000
8
4.0 CANCELLOUS SCREW PARTIALLY THRD/20
183.000
8
4.0 CANCELLOUS SCREW PARTIALLY THRD/22
184.000
8
4.0 CANCELLOUS SCREW PARTIALLY THRD/24
185.000
8
4.0 CANCELLOUS SCREW PARTIALLY THRD/26
186.000
8
4.0 CANCELLOUS SCREW PARTIALLY THRD/28
187.000
8
4.0 CANCELLOUS SCREW PARTIALLY THRD/30
188.000
8
4.0 CANCELLOUS SCREW PARTIALLY THRD/35
189.000
8
4.0 CANCELLOUS SCREW PARTIALLY THRD/40
190.000
8
4.0 CANCELLOUS SCREW PARTIALLY THRD/45
191.000
8
4.0 CANCELLOUS SCREW PARTIALLY THRD/50
192.000
8
4.0 CANCELLOUS SCREW PARTIALLY THRD/55
193.000
8
4.0 CANCELLOUS SCREW PARTIALLY THRD/60
194.000
4
3.5 LCP T-PL 3H HEAD/ 3H SHAFT/50-RT ANG
195.000
4
3.5 LCP T-PL 4H HEAD/ 4H SHAFT/56-RT ANG
196.000
4
3.5 LCP T-PL 3H HEAD/ 5H SHAFT/67-RT ANG
197.000
4
3.5 LCP T-PL 4H HEAD/ 6H SHAFT/78-RT ANG
198.000
4
3.5 LCP T-PL 3H HEAD/ 7H SHAFT/87-RT ANG
199.000
4
3.5 LCP PROXIMAL HUM PL-STD 3H SFT/90
200.000
4
TEMPL 7 H FOR 3.5 LC-DCP & DCP PLS
201.000
4
TEMPL 9 H FOR 3.5 LC-DCP & DCP PLS
202.000
4
TMPL 12H 3.5 LC-DCP & DCP & LCP PLS
203.000
4
3.5 LCP T-PL 3H HD/ 7H SFT/96-OBLIQUE RT
204.000
4
3.5 LCP T-PL 3H HD/ 5H SFT/74-OBLIQUE RT
205.000
4
3.5 LCP T-PL 3H HD/ 4H SFT/63-OBLIQUE RT
206.000
4
3.5 LCP T-PL 3H HD/ 3H SFT/52-OBLIQUE RT
207.000
4
3.5 LCP T-PL 3H HD/ 7H SFT/96-OBL LFT
208.000
4
3.5 LCP T-PL 3H HD/ 5H SFT/74-OBL LFT
209.000
4
3.5 LCP T-PL 3H HD/ 4H SFT/63-OBL LFT
210.000
4
3.5 LCP T-PL 3H HD/ 3H SFT/52-OBL LFT
211.000
4
3.5MM LCP PLATE 5 HOLES 72MM
212.000
4
3.5MM LCP PLATE 6 HOLES 85MM
213.000
4
3.5MM LCP PLATE 7 HOLES 98MM
214.000
4
3.5MM LCP PLATE 6 HOLES 85MM
215.000
4
3.5MM LCP PLATE 7 HOLES 98MM
216.000
4
3.5MM LCP PLATE 8 HOLES 111MM
217.000
4
3.5MM LCP PLATE 9 HOLES 124MM
218.000
4
3.5MM LCP PLATE 12 HOLES 163MM
219.000
4
3.5MM LCP PLATE 14 HOLES 189MM
220.000
4
LCP ONE-THIRD TUBULAR PL COLLAR 5 H/57
221.000
4
LCP ONE-THIRD TUBULAR PL COLLAR 6 H/69
222.000
4
LCP ONE-THIRD TUBULAR PL COLLAR 7 H/81
223.000
4
LCP ONE-THIRD TUBULAR PL COLLAR 8 H/93
224.000
4
LCP ONE-THIRD TUB PL COLLAR 10 H/117
225.000
4
LCP ONE-THIRD TUB PL COLLAR 12 H/141
226.000
4
3.5 LCP RECONSTRUCTION PL 10 HOLES/140
227.000
4
3.5 LCP RECONSTRUCTION PLATE 8 HOLES/112
228.000
4
3.5 LOW PRO RECONSTRUCTION PL 11 HOLES
229.000
4
3.5 LCP RECONSTRUCTION PLATE 6 HOLES/84
230.000
4
3.5 LCP RECONSTRUCTION PLATE 5 HOLES/70
231.000
4
BENDING IRON FOR 2.7 & 3.5 RECON PLS
232.000
4
HOLDING FRCP-SOFT RATCHET PLS TO 9 WIDE
233.000
4
PL HOLDING FORCEPS SWIVEL FOOT/SIZE 0
234.000
4
WIRE-BENDING PLIERS 160MM
235.000
4
IRON FOR 1.25, 1.6 & 2.0 KIRSH WIRES
236.000
4
BENDING IRON FOR 2.7MM & 3.5MM PLATES
237.000
4
BENDING/CUTTING PLIERS
238.000
2
BENDING IRON FOR 2.7MM & 3.5MM PLATES
239.000
4
BENDING/CUTTING PLIERS
240.000
2
WIRE-BENDING PLIERS 160MM
241.000
4
RED FORCEPS POINTS NARROW-RATCHET 132
242.000
4
REDUCTION FORCEPS POINTS RATCHET 130
243.000
4
TERMITE FORCEPS 90MM
244.000
2
BENDING PLIERS-SMOOTH JAWS FOR MINI PLS
245.000
2
PL HOLDING FORCEPS SWIVEL FOOT 150
246.000
2
SHARP HOOK
247.000
2
SM HOHMANN RETRACT 6 SHT NARROW TIP 160
248.000
2
SM HOHMANN RETRACT 8 SHT NARROW TIP 160
249.000
2
PERIOSTEAL ELVTR 3 CRVD BLD - ROUND EDGE
250.000
2
PERIOSTEAL ELEVATOR 3 CRVD BLD-STR EDGE
251.000
2
SCREW AND PLATE HOLDING FORCEPS
252.000
2
2.0MM/1.5MM DOUBLE DRILL SLEEVE
253.000
2
2.4MM/1.8MM DOUBLE DRILL SLEEVE
254.000
2
2.7MM/2.0MM DOUBLE DRILL SLEEVE
255.000
2
HANDLE WITH MINI QUICK COUPLING
256.000
2
HANDLE WITH QUICK COUPLING, SMALL
257.000
2
DEPTH GAUGE FOR 2.0MM AND 2.4MM SCREWS
258.000
2
DEPTH GAUGE FOR 2.7MM & SMALL SCREWS
259.000
2
2.0 PARALLEL DRILL GUIDE & DRILL SLEEVE
260.000
2
2.0MM UNIVERSAL DRILL GUIDE
261.000
2
2.4MM UNIVERSAL DRILL GUIDE
262.000
2
2.7MM UNIVERSAL DRILL GUIDE
263.000
2
0.8MM KIRSCHNER WIRE TROCAR PT 70MM-10PK
264.000
2
1.25 KIRSCHNER WIRE TRCR POINT 150-10PK
265.000
2
1.6 KIRSCHNER WIRE W/TRCR POINT 150-10PK
266.000
2
2.0 KIRSCHNER WIRE TROCAR POINT 150-10PK
267.000
6
2.4 LOCKING SCREW SLF-TPNG SD RECESS 6
268.000
6
2.4 LOCKING SCREW SLF-TPNG SD RECESS 7
269.000
6
2.4 LOCKING SCREW SLF-TPNG SD RECESS 8
270.000
6
2.4 LOCKING SCREW SLF-TPNG SD RECESS 9
271.000
6
2.4 LOCKING SCREW SLF-TPNG SD RECESS 10
272.000
6
2.4 LOCKING SCREW SLF-TPNG SD RECESS 11
273.000
6
2.4 LOCKING SCREW SLF-TPNG SD RECESS 12
274.000
6
2.4 LOCKING SCREW SLF-TPNG SD RECESS 13
275.000
6
2.4 LOCKING SCREW SLF-TPNG SD RECESS 14
276.000
6
2.4 LOCKING SCREW SLF-TPNG SD RECESS 16
277.000
6
2.4 LOCKING SCREW SLF-TPNG SD RECESS 18
278.000
6
2.4 LOCKING SCREW SLF-TPNG SD RECESS 20
279.000
6
2.4 LOCKING SCREW SLF-TPNG SD RECESS 22
280.000
6
2.4 LOCKING SCREW SLF-TPNG SD RECESS 24
281.000
6
2.4 LOCKING SCREW SLF-TPNG SD RECESS 26
282.000
6
2.4 LOCKING SCREW SLF-TPNG SD RECESS 28
283.000
6
2.4 LOCKING SCREW SLF-TPNG SD RECESS 30
284.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC 6
285.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC 7
286.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC 8
287.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC 9
288.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC 10
289.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC 11
290.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC 12
291.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC 13
292.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC 14
293.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC 16
294.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC 18
295.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC 20
296.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC 22
297.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC 24
298.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC 26
299.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC 28
300.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC 30
301.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC-32
302.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC-34
303.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC-36
304.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC-38
305.000
6
2.4 CORTEX SCREW SLF-TPNG T8 SD REC-40
306.000
4
2.4 LCP(TM) CONDYLAR PLATE 7 HOLES SHAFT
307.000
4
2.4 LCP(TM) T-PL 3 HOLES HD/7 HOLES SFT
308.000
4
2.4 LCP(TM) Y-PL 3 HOLES HD/7 HOLES SFT
309.000
4
2.4 LCP(TM) T-PL 2 HOLES HD/7 HOLES SFT
310.000
4
2.4MM LCP(TM) PLATE 4 HOLES 36MM
311.000
4
2.4MM LCP(TM) PLATE 5 HOLES 44MM
312.000
4
2.4MM LCP(TM) PLATE 6 HOLES 52MM
313.000
4
2.4MM LCP(TM) PLATE 7 HOLES 60MM
314.000
4
2.4MM LCP(TM) PLATE 8 HOLES 68MM
315.000
4
2.4MM LCP(TM) PLATE 10 HOLES 84MM
316.000
4
2.4 LCP(TM) ADAPTION PLATE 12 HOLES/88
317.000
4
SDDRIVE SCREWDRIVER SHAFT T8 105MM
318.000
4
2.4MM DRILL BIT/QC/100MM
319.000
4
1.8MM DRILL BIT WITH DEPTH MARK/QC/110MM
320.000
4
THRD LCP(TM) DRILL GUIDE F/LCP(TM) DRPS
321.000
4
BENDING PIN FOR 2.4MM LOCKING PLATES
322.000
4
COUNTERSINK FOR 2.0MM/2.4MM SCREWS
323.000
6
2.0 LOCKING SCREW SLF-TPNG SD RECESS 6
324.000
6
2.0 LOCKING SCREW SLF-TPNG SD RECESS 7
325.000
6
2.0 LOCKING SCREW SLF-TPNG SD RECESS 8
326.000
6
2.0 LOCKING SCREW SLF-TPNG SD RECESS 9
327.000
6
2.0 LOCKING SCREW SLF-TPNG SD RECESS 10
328.000
6
2.0 LOCKING SCREW SLF-TPNG SD RECESS 11
329.000
6
2.0 LOCKING SCREW SLF-TPNG SD RECESS 12
330.000
6
2.0 LOCKING SCREW SLF-TPNG SD RECESS 13
331.000
6
2.0 LOCKING SCREW SLF-TPNG SD RECESS 14
332.000
6
2.0 LOCKING SCREW SLF-TPNG SD RECESS 16
333.000
6
2.0 LOCKING SCREW SLF-TPNG SD RECESS 18
334.000
6
2.0 LOCKING SCREW SLF-TPNG SD RECESS 20
335.000
6
2.0 LOCKING SCREW SLF-TPNG SD RECESS 22
336.000
6
2.0 LOCKING SCREW SLF-TPNG SD RECESS 24
337.000
6
2.0 LOCKING SCREW SLF-TPNG SD RECESS 26
338.000
6
2.0 LOCKING SCREW SLF-TPNG SD RECESS 28
339.000
6
2.0 LOCKING SCREW SLF-TPNG SD RECESS 30
340.000
6
COUNTERSINK FOR 2.0MM/2.4MM SCREWS
341.000
6
THREADED BENDING PIN FOR 2.0 LCP(TM) PLS
342.000
4
1.5 THREADED DRILL GUIDE DEPTH GAUGE
343.000
4
1.5 DRILL BIT W/DEPTH MARK MINI QC/96
344.000
4
2.0MM DRILL BIT/MINI QC/65MM
345.000
4
SD SCRDRIVER SFT SD6/SELF-RETAINING/2.0
346.000
4
2.0 LCP(TM) ADAPTION PLATE 12 HOLES 81
347.000
4
2.0MM LCP(TM) PLATE 10 HOLES/73MM
348.000
4
2.0MM LCP(TM) PLATE 8 HOLES/59MM
349.000
4
2.0MM LCP(TM) PLATE 7 HOLES/52MM
350.000
4
2.0MM LCP(TM) PLATE 6 HOLES/45MM
351.000
4
2.0MM LCP(TM) PLATE 5 HOLES/38MM
352.000
4
2.0MM LCP(TM) PLATE 4 HOLES/31MM
353.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 10
354.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 12
355.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 14
356.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 16
357.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 18
358.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 20
359.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 22
360.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 24
361.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 26
362.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 28
363.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 30
364.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 32
365.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 34
366.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 36
367.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 38
368.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 40
369.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 42
370.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 44
371.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 46
372.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 48
373.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 50
374.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 55
375.000
6
2.7 LCKNG SCREW SLF-TPNG T8 SD REC 60
376.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC 10
377.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC 12
378.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC 14
379.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC 16
380.000
16
2.7 CORTEX SCREW SLF-TPNG T8 SD REC 18
381.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC 20
382.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC 22
383.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC 24
384.000
16
2.7 CORTEX SCREW SLF-TPNG T8 SD REC 26
385.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC 28
386.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC 30
387.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC 32
388.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC 34
389.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC 36
390.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC 38
391.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC 40
392.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC/42
393.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC/44
394.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC/46
395.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC/48
396.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC/50
397.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC/55
398.000
6
2.7 CORTEX SCREW SLF-TPNG T8 SD REC/60
399.000
4
2.7MM LCP(TM) PLATE 4 HOLES/40MM
400.000
4
2.7MM LCP(TM) PLATE 5 HOLES/49MM
401.000
4
2.7MM LCP(TM) PLATE 6 HOLES/58MM
402.000
4
2.7MM LCP(TM) PLATE 7 HOLES/67MM
403.000
4
2.7MM LCP(TM) PLATE 8 HOLES/76MM
404.000
4
2.7MM LCP(TM) PLATE 10 HOLES/94MM
405.000
4
2.7 LCP(TM) L-PL RIGHT 2H HEAD/3H SHAFT
406.000
4
2.7 LCP(TM) L-PL RIGHT 2H HEAD/4H SHAFT
407.000
4
2.7 LCP(TM) L-PL LEFT 2H HEAD/3H SHAFT
408.000
4
2.7 LCP(TM) L-PL LEFT 2H HEAD/4H SHAFT
409.000
4
2.7 LCP(TM) L-PL OBLIQUE RT 2H HD/3H SFT
410.000
4
2.7 LCP(TM) L-PL OBLIQUE RT 2H HD/4H SFT
411.000
4
2.7 LCP(TM) L-PL OBL LFT 2H HD/3H SFT
412.000
4
2.7 LCP(TM) L-PL OBL LFT 2H HD/4H SFT
413.000
4
2.7 LCP(TM) CONDYLAR PLATE 7 HOLES SHAFT
414.000
4
2.7 LCP(TM) ADAPTION PLATE 12 HOLES/97
Supply Specifications Requirements:
Physical Characteristics
See listing above.
The anticipated Small Business Administration (SBA) size standard for the North American Industry Classification System (NAICS) code 339112 is ____________ (employees or dollars).
3. Responses Requested: The following questions must be answered in response to this RFI.
Answers that are not provided shall be considered non-responsive to the RFI:
a. Where are the requested items/equipment manufactured?
Vendor must attach documentation of this information to be viewed by the government to be considered as part of the Market Research and responsiveness to this Sources Sought notice
b. Are the requested items/equipment manufactured by a Small or Large business? Is the potential vendor in compliance with the Non-Manufacturer Rule (NMR)?
Vendor must attach documentation of this to be viewed by the government to be considered as part of the Market Research and responsiveness to this Sources Sought notice
c. Is the Vendor an authorized distributor with access to Original Equipment Manufacturer (OEM) parts which may be required in performance of this requirement?
The VA does not accept grey market items and therefore the Vendor must attach evidence of this access (Authorized Distributor letter) to be viewed by the government to be considered as part of the Market Research and responsiveness to this Sources Sought notice.
d. Name of potential Contractor that possess the capability to fulfill this requirement. Contractors shall also provide the following:
Point(s) of contact name: _______________________________________________
Address: ___________________________________________________
Telephone number: ___________________________________________
Email address: _______________________________________________
Company's business size: ________________________________________________
Data Universal Numbering System (DUNS) #: _______________________________
e. Is your company considered a small business concern, SB, SDVOSB, VOSB, HUBZone, or 8A concern, with the requisite __________________ NAICS code?
Please provide proof of qualifications.
f. Is your company available under any Government Wide Agency Contract (GWAC), General
Services Administration (GSA) Schedule, Indefinite Delivery Indefinite Quantity (IDIQ), and/or
Blanket Purchase Agreement (BPA)?
If so, please identify the contract number for the Government to review as part of this Market Research.
4. Opportunity/Market Pricing: The MEDVAMC is seeking information from potential vendors on their ability to provide the required items/equipment. THIS IS A SOURCES SOUGHT REQUEST FOR INFORMATION (RFI) ONLY. Small Business Concerns are encouraged to provide responses to this RFI in order to assist the MEDVAMC in determining potential levels of competition and general market pricing available in the industry. Therefore, vendors are requested to submit estimated market research pricing along with their responses to the above. The estimated pricing will be considered when determining the procurement strategy for the forthcoming solicitation.
5. Instructions and Response Guidelines: Questions regarding this RFI shall be submitted no later than 13:00 (CST), February 22, 2023 via email to Oney.kelly@va.gov
RFI responses are due by 13:00 (CST), Wednesday, February 22, 2023; size is limited to 8.5 x 11 inches, 12-point font, with 1-inch margins in Microsoft Word format via email to Oney.kelly@va.gov the subject line shall read: MEDVAMC Depuy/Equivalent Surgical Instruments. NO SOLICITATION EXISTS AT THIS TIME. There is no page limitation on subparagraphs 3(a) - 3(f).
Please provide the information you deem relevant in order to respond to the specific inquiries of the RFI. Information provided will be used solely by MEDVAMC as Market Research and will not be released outside of the MEDVAMC Purchasing and Contract Team.
7. Contact Information:
Oney Kelly
Oney.kelly@va.gov
Your response to this notice is greatly appreciated!
Attachments/Links
Contact Information
Contracting Office Address
- 715 SOUTH PEAR ORCHARD RD., PLAZA 1
- RIDGELAND , MS 39157
- USA
Primary Point of Contact
- Oney.kelly@va.gov
- Oney.Kelly@va.gov
- Phone Number 713-791-1414
Secondary Point of Contact
History
- Mar 04, 2023 10:58 pm CSTSources Sought (Updated)
- Feb 15, 2023 10:30 am CSTSources Sought (Original)